설명
Warranty | 1 Years |
Manufacturer | Eight.3 |
Manufacturer Part # | P9958 |
Item # | P9958 |
Warning | This product can expose you to chemicals including DINP (Diisononyl phthalate) and DIDP (Diisodecyl phthalate) which are known to the State of California to cause cancer. For more information go to https://www.p65warnings.ca.gov. |
What’s Included: Eight.3 Ronix Telescope 800 | Telescope Pump | All Necessary Fittings
The Eight.3 Ronix Telescope Trapezoid 800lb Ballast Bag is designed to fit in the rear compartment of any v-drive boat, and also works great for building a massive wake on the floor of any direct-drive boat. The versatile back fits just about anywhere thanks to its size and shape. The width of the bag tapers from being the widest at the bottom to create a trapezoidal shape, which Ronix coined Anti-Roll technology; This means no more monitoring your bags. Just fill them and leave them. Ronix rethought and redesigned nearly every aspect of the wakeboard ballast bag.
Using the Eight.3 Ronix Telescope System is easy. Fill and drain your new Ronix Telescope bags in a fraction of the time that you’re used to with the 3000 GPH or 3700 GPH portable pump options. To fill, simply connect the male fitting on the end of the hose to the quick fill port on the top of the bag. Don’t worry about spilling any water as there’s a built-in check valve to eliminate spills even when the bag is overfilled. To drain, open the telescoping drain tube. Place the pump body into the bag, and the hose end over the edge of the boat. Once your hose is over the edge, turn the pump on to begin draining.
Eight.3 Ronix Telescope 800 Ballast Bag
Bag Capacity: 800lbs
Bag Dimensions: 50″L x 22″W x 20″H
Eight.3 Ronix 3700GPH Telescope Pump
Pump Speed: 3700GPH
Hose Length: 10’
Power Cable Length: 15’
Inline Power Switch: Yes
Bag Compatibility: Eight.3 Ronix Telescope Ballast Bags
Eight.3 Ronix 3000GPH Telescope Pump
Pump Speed: 3000GPH
Hose Length: 10’
Power Cable Length: 15’
Inline Power Switch: Yes
Bag Compatibility: Eight.3 Ronix Telescope Ballast Bags
Ballast Bag Port Placement
To the left are the approximate locations of the ports on this Eight.3 Ronix Telescope Ballast Bag.
1” Port Size
All Eight.3 Telescope Tech ballast bags use 1” ports. To fill the bag, there is a 1.5” fill port that is only compatible with Eight.3’s Telescope Ballast Pump. To drain the bag, the pump is dropped into the bag by opening the telescoping chamber.
Portable Ballast Solution
These ballast bags are designed to be used as a portable ballast system in conjunction with a Portable Ballast Pump. This bag does have integration compatibility but is not designed to fit in any boat lockers.
How to Ballast bag install